Eaton Bray Flat Roof Leak Detection

Flat Roof Leak Detection in Eaton Bray
Commercial Flat Roof Inspections

Don't allow a flat roof leak to cause damage to your property
Call now to book an inspection and make sure your roof is secure and in good condition

  • Non Destructive Solution
  • Accurately pinpoint your leak
  • 99% Success Rate
  • Prevents further damage to your property

Request A Call Back

How Important Is It To Identify Flat Roof Leaks Quickly

Your flat roof is an important aspect of your building, protecting the structure as well as the contents from the weather. However, flat roofs have a higher risk of leaking than sloped roofing, and if not dealt with promptly, even a minor leak can become a major problem very quickly. Flat roof leaks can lead to multiple water entry points in the area below, which could cause severe damage to your property and the contents. Our roof leak detection specialists can inspect your roof to identify the source of the leak quickly and prevent costly repairs and replacements.

Flat roofs can be vulnerable to leaks due to a variety of factors including poor installation, poor maintenance, and exposure to severe weather. Flat roof leaks could be caused due to cracked flashing, blocked gutters or punctures caused by falling objects.

It’s important to remember not all roof leaks can be easily detected without the help of experts with the right tools and experience. A regular roofing maintenance plan will help to keep your roof in good repair over the long term, and regular roof inspections can also be helpful to detect minor leaks before they become serious problems.

Our team provides both commercial and residential roof leak detection services throughout Eaton Bray as well as the entire Bedfordshire region, including Totternhoe, Church End, Sewell, Billington, Stanbridge.

Are you the owner of a flat-roofed building that leaks?

Specialists In Electronic Flat Roof Leak Detection

We are an independent UK flat roof leak detection company, with specialists in third-party electronic leak detection and integrity testing on all types of flat roofs and structural waterproofing membranes.

Our roof technicians based in Eaton Bray can inspect all types of flat roof throughout the Bedfordshire areas, both residential and commercial. They use non-destructive flat roof electronic leak detection methods like low voltage earth leakage testing, high dielectric electronic integrity testing, differential pressure vacuum testing, drone surveying & thermal imaging to locate the entry point quickly and precisely. It doesn’t matter what the weather is like for a leak detection survey. After your flat-roof survey is completed, you will receive a complete Health and Safety Plan and Risk assessments, as well as Method Statements. These together make up an extensive O&M Manual.

Integrity Testing For New Flat, Green And Blue Roofs

Any flat, green or blue roofs should adhere to NHBC Chapter 7.1. Flat Roofs. Terraces. and Balconies in addition to British Standard 6229: 2018, (Flat Roofs with Continuously Supported Flexible Weatherproof Coverings, Code Of Practice).

Before roofing membranes are overlaid, they should be visually checked and electronically tested for waterproofing. Any potential flaws in the membrane must be corrected and then the membrane should be retested before being overlaid, in accordance with NHBC Chapter 7.1.9 (Green Roofs & Propriety Roofs).

Premier Guarantee Structural Warranties extend this a step further. According to section 7.11.25.2 in the “Roof Coverings –Green Roofing”, section 7.11, waterproof membrane integrity must be verified before any other components can be applied. The testing should be done by a third party, who is not related to the roofing contract.

A roof survey will be done and all roof penetrations will be inspected. This will include an evaluation and assessment for any roof penetrations, , terminations, mounts for equipment, roof membrane conditions, parapet wall coping and perimeter flashing.

{While vacuum testing membrane seams off-site can be a great way to assess quality, it is not recommended for proving flat roof integrity.|Vacuum testing of seams of membranes done off-site is an excellent way to determine quality but it is not recommended to be used to verify the integrity of flat roofs.|Although it can be useful to test the quality of seams off-site, it is not recommended as a method to prove flat roof integrity.|While it’s a good way of evaluating quality, vacuum testing membrane seams is not recommended to prove flat roofs’ integrity.

We understand that every job can be different and our team have the experience and knowledge to handle any kind of roof and customer requirements. All our roof surveys comply with the requirements set forth by the major UK warranty providers as well as British Standards, The Property Care Association, and CIRIA.

If you have further questions about our flat roof leak detection in Eaton Bray get in touch today to book a free quote.

Eaton Bray commercial flat roof inspection services
Eaton Brayelectronic roof leak detection
high voltage-dielectric roof integrity testing Eaton Bray

You Need To Be Able To Quickly Detect Leaks In Order For Your Property To Be Protected For A Variety Of Reasons.

  • Preventing Structural Damage - If left unchecked, water leaks can harm your building’s structural integrity. This could cause costly repairs, or worse, your building may collapse. Early leak detection can save your building’s structural integrity and help to avoid further damage.
  • Avoiding Mold And Mildew - Mold and mildew can have major health effects on the occupants of your building and can be prevented by sealing any leaks in your roof quickly. By detecting roof leaks early, you can help keep your building safe by stopping the spread of mildew and mould.
  • You Can Reduce Repair Costs - The longer roof leaks go unnoticed, the more damage that they cause. This will result in more costly and complex repairs than if the leak was detected earlier. It is possible to reduce damage and repair costs by quickly identifying leaks.
  • Save On Energy Costs - A roof leak can cause draughts and make it harder to keep your building at a comfortable temperature, which can increase your energy costs. You can reduce your energy consumption by finding roof leaks early.
  • Reduce Your Insurance Costs - If your building has a history of water damage, your insurance company may charge you higher premiums. It is possible to keep your insurance premiums down by identifying any leaks early and avoiding damages.

Reduce insurance costs: If your building has a history of water damage, your insurance company may charge you higher premiums. It is possible to keep your insurance premiums down by identifying any leaks early and avoiding damages.

Flat Roof Leaks: Common Symptoms

  • Water stains on the ceiling are one of the most evident indicators of a flat roof leak. These stains may appear as discoloured patches or water droplets and can indicate a leaking roof. Water stains on the ceiling may also be caused by plumbing leaks, therefore a professional roof inspection will help to pinpoint the source.
  • Peeling paint or wallpaper is another sign that your flat-roof could be leaking. The wallpaper or paint may start peeling off the walls when water seeps into the attic and through the ceiling. High humidity and condensation can also lead to this, you should have a professional roof inspector inspect your roof to confirm that there aren’t any leaks.
  • A flat roof leak could be the cause of a musty or mouldy odour. Water can cause mould growth and mildew to grow inside the structure, which can lead to your property having a musty odour. This could pose a risk to your health and should be repaired immediately.
  • Condensation from the inside is another indication of a flat roofing leak. When the outside temperature is higher than inside, condensation can build up on the roof’s surface. This indicates a leak. This can also be caused by poor insulation or inadequate ventilation.

It is important to remember that symptoms like these can also be caused by other problems, therefore a professional roof inspection is necessary to pinpoint the root cause.

If you have further questions about our flat roof leak detection in Eaton Bray get in touch today to book a free quote.

Roof Leak Detection FAQs

Does insurance cover flat roofs?

Insurers in most cases will define flat roofs as being pitched at 10 degrees or less. Having a small part of your roof being flat usually is not a problem, but if over 25% of your roof is flat, you may find that most insurers may not be able to offer you any cover at all.

How long does flat roof sealant last?

Summary: roof coating systems last 10-20 years, but once they reach the end of their warranty, they can be recoated and a new warranty begins. The process can be repeated, making roof coating systems a renewable and sustainable roofing system.

Should a flat roof hold any water?

Whilst brief and occasional ponding is acceptable on a flat roof, regular or long-lasting ponding could be an indication that there is an issue with the roof that needs to be addressed.

Should I avoid buying a house with a flat roof?

Flat roofs are considered versatile and simple to maintain, but they can also be costly to repair. They are an energy-efficient alternative to sloped roofs but often come with issues such as a higher risk of leaking and water pooling. Flat roofs often have a shorter lifespan compared to sloped roofs

What is the major disadvantage of using a flat roof?

The biggest drawback of flat roofs is the drainage or lack thereof. Sure, flat roofs do have a slight slope that drains the water, but not nearly as efficiently as a pitched roof. The rainwater tends to remain on the roof and form a puddle, which can lead to possible leaks or material damage

 

 

If you have further questions about our flat roof leak detection in Eaton Bray get in touch today to book a free quote.